Angelwax Enigma legacy Wheel & Caliper Coating

Tough, Durable All Weather Wheel Protection

ENIGMA LEGACY WHEEL & CALIPER from Angelwax is a titanium ceramic coating specifically designed for alloy wheels and brake calipers. With a focus on ease of use, this coating can be easily applied by both professional detailers and enthusiasts in just minutes.

Unlike other ceramic coatings, it does not require infra-red lighting for curing. It provides long-lasting protection against fallout and contamination for easier cleaning and maintenance.

Features:

• Chemical bonding provides superior durability
• Surface rheology provides excellent stain & contaminant resistance
• Based on similar technology as ENIGMA LEGACY
• Can be applied to wheels and calipers
• Very easy to apply: wipe on, wipe off formula

How To Use:

Directions:  Clean each wheel and caliper using BILBERRY WHEEL CLEANER or REVELATION thoroughly and suitably prepare the surface removing ALL contamination. For best results, before application, polish the wheels and calipers to a high gloss finish using either REDEMPTION or PERFECT POLISH.  Always apply ceramic products in a sheltered environment.

Remove the cap on the bottle and apply a few drops of ENIGMA LEGACY WHEEL & CALIPER onto a microfibre applicator or a suede applicator cloth which is used in conjunction with the Angelwax foam block. Apply the coating to one wheel/caliper at a time. Once the wheel/caliper has been coated, allow the coating to cure to the wheel/caliper surface for 2 minutes before removing the residue with a clean, dry, microfibre cloth. Once this has been completed, use a buffing towel to create a high gloss finish.

The curing time of two minutes is dependent on a temperature of approximately 20°c/68°f.

The coating may take longer to cure if applied in colder temperatures and the coating will cure more quickly in a warmer environment.

Top Tip: If possible, do not use the vehicle for approximately 2 to 4 hours after the coating has been applied as this will help the crosslink density of the coating to increase. This will maximise the surface properties and increase the durability of the coating.

Sizes: 30ml & 50ml (Select from drop down menu above)